Surgex SX-1120-RT Manuale Utente Scaricare il pdf

SurgeX

Installation Instructions

SX1115RT and SX1120RT

Mounting

The SurgeX SX1115/1120RT are designed to be installed in a 19 inch equipment

rack and require one unit (1-U) of rack space. Remove the product from its

packaging and slide it into place in the rack being careful to feed the power cord

into the rack first and guide it so that it does not get caught or jammed as the

product is installed. Use the four screws provided with the product to secure the

rack ears to the rack rails. These screws can be tightened by hand and do not

require tools.

120 Volt Connections

Connect power to the unit by plugging the cord into a 120V ac receptacle. The

SX1120RT must be plugged into a 20 amp receptacle. If a 120V, 20 amp

receptacle is not available, you will need to have one installed by a licensed

electrical contractor.

The SX1115/1120RT have a total of 9 receptacles: six switched, two always on

and a front panel courtesy outlet. Each receptacle is rated for a maximum load of

15 amps, but the total load must not exceed 15 amps for the SX1115RT and 20

amps for the SX1120RT. Plug the equipment cords into the always-on and

switched receptacles as needed to power the equipment.

The always-on and courtesy receptacles provide power as long as power is

supplied to the SurgeX and the AC voltage is within normal limits. The six

switched outlets provide power only when the front panel switch is on and the

remote control input is also activated.

1 2 3 4

SurgeX Installation Instructions SX1115RT and SX1120RT Mounting The SurgeX SX1115/1120RT are designed to be installed in a 19 inch equipment rac

Indicator Lights The SX1115-RT and SX1120-RT have four indicator lights on the front panel. The red Power light indicates that the power switch is tu

Control Connections Control of the switched receptacles can be accomplished by using a switch (contact closure), another SurgeX product such as the

Auxiliary Relay Contacts The auxiliary relay contacts, pins 6 & 7, provide a way to cascade units or to provide confirmation feedback to a centr

Modelli collegati SX-1115-RT | SX-1115 |

Nessun commento